Kirigami-Inspired 3D Printable Soft Pneumatic Actuators with Multiple Deformation Modes for Soft Robotic Applications.

Soft robots have received much attention due to their impressive capabilities including high flexibility and inherent safety features for humans or unstructured environments compared with hard-bodied robots. Soft actuators are the crucial components of soft robotic systems. Soft robots require dexterous soft actuators to provide the desired deformation for different soft robotic applications. Most of the existing soft actuators have only one or two deformation modes. In this article, a new soft pneumatic actuator (SPA) is proposed taking inspiration from Kirigami. Kirigami-inspired cuts are applied to the actuator design, which enables the SPA to be equipped with multiple deformation modes. The proposed Kirigami-inspired soft pneumatic actuator (KiriSPA) is capable of producing bending motion, stretching motion, contraction motion, combined motion of bending and stretching, and combined motion of bending and contraction. The KiriSPA can be directly manufactured using 3D printers based on the fused deposition modeling technology. Finite element method is used to analyze and predict the deformation modes of the KiriSPA. We also investigated the step response, creep, hysteresis, actuation speed, stroke, workspace, stiffness, power density, and blocked force of the KiriSPA. Moreover, we demonstrated that KiriSPAs can be combined to expand the capabilities of various soft robotic systems including the soft robotic gripper for delicate object manipulation, the soft planar robotic manipulator for picking objects in the confined environment, the quadrupedal soft crawling robot, and the soft robot with the flipping locomotion.

A Preliminary Study on Grip-Induced Nerve Damage Caused by a Soft Pneumatic Elastomeric Gripper.

Forceps, clamps, and haemostats are essential surgical tools required for all surgical interventions. While they are widely used to grasp, hold, and manipulate soft tissue, their metallic rigid structure may cause tissue damage due to the potential risk of applying excessive gripping forces. Soft pneumatic surgical grippers fabricated by silicone elastomeric materials with low Young's modulus may offer a promising solution to minimize this unintentional damage due to their inherent excellent compliance and compressibility. The goal of this work is to evaluate and compare the grip-induced nerve damage caused by the soft pneumatic elastomeric gripper and conventional haemostats during surgical manipulation. Twenty-four Wistar rats (male, seven weeks) are subjected to sciatic nerve compression (right hind limb) using the soft pneumatic elastomer gripper and haemostats. A histopathological analysis is conducted at different time-points (Day 0, Day 3, Day 7 and Day 13) after the nerve compression to examine the morphological tissue changes between the rats in the 'soft gripper' group and the 'haemostats' group. A free walking analysis is also performed to examine the walking function of the rats after recovery from different time points. Comparing the rigid haemostats and soft gripper groups, there is a visible difference in the degree of axonal vacuolar degeneration between the groups, which could suggest the presence of substantial nerve damage in the 'haemostats' group. The rats in the haemostats group exhibited reduced right hind paw pressure and paw size after the nerve compression. It shows that the rats tend not to exert more force on the affected right hind limb in the haemostats group compared to the soft gripper group. In addition, the stance duration was reduced in the injured right hind limb compared to the normal left hind limb in the haemostats group. These observations show that the soft pneumatic surgical gripper made of silicone elastomeric materials might reduce the severity of grip-induced damage by providing a safe compliant grip compared to the conventional haemostats. The soft pneumatic elastomer gripper could complement the current surgical gripping tool in delicate tissue manipulation.

Three-Dimensional Printable Ball Joints with Variable Stiffness for Robotic Applications Based on Soft Pneumatic Elastomer Actuators.

This paper contributes to a new design of the three-dimensional printable robotic ball joints capable of creating the controllable stiffness linkage between two robot links through pneumatic actuation. The variable stiffness ball joint consists of a soft pneumatic elastomer actuator, a support platform, an inner ball and a socket. The ball joint structure, including the inner ball and the socket, is three-dimensionally printed using polyamide-12 (PA12) by selective laser sintering (SLS) technology as an integral mechanism without the requirement of assembly. The SLS technology can make the ball joint have the advantages of low weight, simple structure, easy to miniaturize and good MRI compatibility. The support platform is designed as a friction-based braking component to increase the stiffness of the ball joint while withstanding the external loads. The soft pneumatic elastomer actuator is responsible for providing the pushing force for the support platform, thereby modulating the frictional force between the inner ball, the socket and the support platform. The most remarkable feature of the proposed variable stiffness design is that the ball joint has 'zero' stiffness when no pressurized air is supplied. In the natural state, the inner ball can be freely rotated and twist inside the socket. The proposed ball joint can be quickly stiffened to lock the current position and orientation of the inner ball relative to the socket when the pressurized air is supplied to the soft pneumatic elastomer actuator. The relationship between the stiffness of the ball joint and the input air pressure is investigated in both rotating and twisting directions. The finite element analysis is conducted to optimize the design of the support platform. The stiffness tests are conducted, demonstrating that a significant stiffness enhancement, up to approximately 508.11 N·mm reaction torque in the rotational direction and 571.93 N·mm reaction torque in the twisting direction at the pressure of 400 kPa, can be obtained. Multiple ball joints can be easily assembled to form a variable stiffness structure, in which each ball joint has a relative position and an independent stiffness. Additionally, the degrees of freedom (DOF) of the ball joint can be readily restricted to build the single-DOF or two-DOFs variable stiffness joints for different robotic applications.

Texture Discrimination with a Soft Biomimetic Finger Using a Flexible Neuromorphic Tactile Sensor Array That Provides Sensory Feedback.

The compliant nature of soft fingers allows for safe and dexterous manipulation of objects by humans in an unstructured environment. A soft prosthetic finger design with tactile sensing capabilities for texture discrimination and subsequent sensory stimulation has the potential to create a more natural experience for an amputee. In this work, a pneumatically actuated soft biomimetic finger is integrated with a textile neuromorphic tactile sensor array for a texture discrimination task. The tactile sensor outputs were converted into neuromorphic spike trains, which emulate the firing pattern of biological mechanoreceptors. Spike-based features from each taxel compressed the information and were then used as inputs for the support vector machine classifier to differentiate the textures. Our soft biomimetic finger with neuromorphic encoding was able to achieve an average overall classification accuracy of 99.57% over 16 independent parameters when tested on 13 standardized textured surfaces. The 16 parameters were the combination of 4 angles of flexion of the soft finger and 4 speeds of palpation. To aid in the perception of more natural objects and their manipulation, subjects were provided with transcutaneous electrical nerve stimulation to convey a subset of four textures with varied textural information. Three able-bodied subjects successfully distinguished two or three textures with the applied stimuli. This work paves the way for a more human-like prosthesis through a soft biomimetic finger with texture discrimination capabilities using neuromorphic techniques that provide sensory feedback; furthermore, texture feedback has the potential to enhance user experience when interacting with their surroundings.

Wireless Ti3C2Tx MXene Strain Sensor with Ultrahigh Sensitivity and Designated Working Windows for Soft Exoskeletons.

Emerging soft exoskeletons pose urgent needs for high-performance strain sensors with tunable linear working windows to achieve a high-precision control loop. Still, the state-of-the-art strain sensors require further advances to simultaneously satisfy multiple sensing parameters, including high sensitivity, reliable linearity, and tunable strain ranges. Besides, a wireless sensing system is highly desired to enable facile monitoring of soft exoskeleton in real time, but is rarely investigated. Herein, wireless Ti3C2Tx MXene strain sensing systems were fabricated by developing hierarchical morphologies on piezoresistive layers and incorporating regulatory resistors into circuit designs as well as integrating the sensing circuit with near-field communication (NFC) technology. The wireless MXene sensor system can simultaneously achieve an ultrahigh sensitivity (gauge factor ≥ 14,000) and reliable linearity (R2 ≈ 0.99) within multiple user-designated high-strain working windows (130% to ≥900%). Additionally, the wireless sensing system can collectively monitor the multisegment exoskeleton actuations through a single database channel, largely reducing the data processing loading. We finally integrate the wireless, battery-free MXene e-skin with various soft exoskeletons to monitor the complex actuations that assist hand/leg rehabilitation.

Texture Discrimination using a Soft Biomimetic Finger for Prosthetic Applications.

Soft robotic fingers have shown great potential for use in prostheses due to their inherent compliant, light, and dexterous nature. Recent advancements in sensor technology for soft robotic systems showcase their ability to perceive and respond to static cues. However, most of the soft fingers for use in prosthetic applications are not equipped with sensors which have the ability to perceive texture like humans can. In this work, we present a dexterous, soft, biomimetic solution which is capable of discrimination of textures. We fabricated a soft finger with two individually controllable degrees of freedom with a tactile sensor embedded at the fingertip. The output of the tac- tile sensor, as texture plates were palpated, was converted into spikes, mimicking the behavior of a biological mechanoreceptor. We explored the spatial properties of the textures captured in the form of spiking patterns by generating spatial event plots and analyzing the similarity between spike trains generated for each texture. Unique features representative of the different textures were then extracted from the spikes and input to a classifier. The textures were successfully classified with an accuracy of 94% when palpating at a rate of 42 mm/s. This work demonstrates the potential of providing amputees with a soft finger with sensing capabilities, which could potentially help discriminate between different objects and surfaces during activities of daily living (ADL) through palpation.

Shape Programming Using Triangular and Rectangular Soft Robot Primitives.

This paper presents fabric-based soft robotic modules with primitive morphologies, which are analogous to basic geometrical polygons-trilateral and quadrilateral. The two modules are the inflatable beam (IB) and fabric-based rotary actuator (FRA). The FRA module is designed with origami-inspired V-shaped pleats, which creates a trilateral outline. Upon pressurization, the pleats unfold, which enables propagation of angular displacement of the FRA module. This allows the FRA module to be implemented as a mobility unit in the larger assembly of pneumatic structures. In the following, we examine various ways by which FRA modules can be connected to IB modules. We studied how different ranges of motion can be achieved by varying the design of the rotary joint of the assemblies. Using a state transition-based position control system, movement of the assembled modules could be controlled by regulating the pneumatic pressurization of the FRA module at the joint. These basic modules allow us to build different types of pneumatic structures. In this paper, using IB and FRA modules of various dimensions, we constructed a soft robotic limb with an end effector, which can be attached to wheelchairs to provide assistive grasping functions for users with disabilities.

Design and Evaluation of a Novel Hybrid Soft Surgical Gripper for Safe Digital Nerve Manipulation.

Forceps are essential tools for digital nerve manipulation during digital nerve repair surgery. However, surgeons have to operate forceps with extreme caution to prevent detrimental post-operative complications caused by over-gripping force. Their intrinsically safe characteristics have led to the increasing adoption of soft robotics in various biomedical applications. In this paper, a miniaturized hybrid soft surgical gripper is proposed for safe nerve manipulation in digital nerve repair surgery. This new surgical gripper includes a soft inflatable actuator and a gripper shell with a hook-shaped structure. The ability to achieve a compliant grip and safe interaction with digital nerves is provided by the inflated soft pneumatic actuator, while the rigid hook retractor still allows surgeons to scoop up the nerve from its surrounding tissues during surgery. The performance of the proposed surgical gripper was evaluated by the contact/pulling force sensing experiments and deformation measurement experiments. In the cadaver experiments, this new surgical gripper was able to complete the required nerve manipulation within the limited working space. The average deformation of the digital nerve with an average diameter of 1.45 mm gripped by the proposed surgical gripper is less than 0.22 mm. The average deformity is less than 15% of its original diameter.

Rod-based Fabrication of Customizable Soft Robotic Pneumatic Gripper Devices for Delicate Tissue Manipulation.

Soft compliant gripping is essential in delicate surgical manipulation for minimizing the risk of tissue grip damage caused by high stress concentrations at the point of contact. It can be achieved by complementing traditional rigid grippers with soft robotic pneumatic gripper devices. This manuscript describes a rod-based approach that combined both 3D-printing and a modified soft lithography technique to fabricate the soft pneumatic gripper. In brief, the pneumatic featureless mold with chamber component is 3D-printed and the rods were used to create the pneumatic channels that connect to the chamber. This protocol eliminates the risk of channels occluding during the sealing process and the need for external air source or related control circuit. The soft gripper consists of a chamber filled with air, and one or more gripper arms with a pneumatic channel in each arm connected to the chamber. The pneumatic channel is positioned close to the outer wall to create different stiffness in the gripper arm. Upon compression of the chamber which generates pressure on the pneumatic channel, the gripper arm will bend inward to form a close grip posture because the outer wall area is more compliant. The soft gripper can be inserted into a 3D-printed handling tool with two different control modes for chamber compression: manual gripper mode with a movable piston, and robotic gripper mode with a linear actuator. The double-arm gripper with two actuatable arms was able to pick up objects of sizes up to 2 mm and yet generate lower compressive forces as compared to elastomer-coated and non-coated rigid grippers. The feasibility of having other designs, such as single-arm or hook gripper, was also demonstrated, which further highlighted the customizability of the soft gripper device, and it's potential to be used in delicate surgical manipulation to reduce the risk of tissue grip damage.

Investigation of the biomechanical effect of variable stiffness shoe on external knee adduction moment in various dynamic exercises.

BACKGROUND: The growing ageing population and high prevalence of knee osteoarthritis (OA) in athletes across nations have created a strong demand for improved non-invasive therapeutic alternatives for knee OA. The aim of this study is to investigate the effect of the variable stiffness shoe (VSS), a new non-invasive therapeutic approach, on external knee adduction moment (EKAM) in various dynamic exercises. EKAM is believed to have positive correlation with the progression and development of knee OA. METHODS: Thirty young participants (16 male and 14 female; age 22.6 ± 1.9 years) from National University of Singapore were enrolled in this study. The tested activities were walking, running, drop-landing, and lateral hopping. All the dynamic exercises were recorded simultaneously by the 8-camera VICON Motion Systems (Oxford Metric, UK) with a sampling rate of 100 Hz. RESULTS: The results showed that the EKAM was reduced in all the dynamic exercises with the use of VSS. The VSS produced significant reductions in the peak EKAM during walking (4.97%, p = 0.039), running (11.15%, p = 0.011), drop-landing (11.18%, p = 0.038) and lateral hopping (17.34%, p = 0.023) as compared to the control shoe. CONCLUSIONS: The reduction of EKAM with the use of VSS in various dynamic exercises demonstrates its potential in delaying the onset and the progression of knee OA in early stage of knee OA patients.

The biomechanics of ACL injury: progresses toward prophylactic strategies.

Anterior cruciate ligament (ACL) injuries are highly prevalent during sporting activities. These injuries often are associated with maneuvers involving landing or sudden change in direction, which are thought to "destabilize" the knee joint and cause ACL rupture. ACL injuries can affect one's mobility and quality of life because of abnormal locomotion and consequent knee pain. This review presents key findings from prior biomechanics studies that aimed to understand ACL injury mechanisms. These studies, ranging from motion analyses and in vitro impact tests to knee finite element simulations and multibody dynamics musculoskeletal simulations, have collectively revealed the multifactorial nature of ACL injury mechanisms. Therefore, the second part of this review addresses the strong need to develop prophylactic strategies that can attenuate the factors involved in ACL injury mechanisms, such that the knee joint can be protected from ACL injuries. Previous studies have emphasized strategies such as knee bracing and strength training of important muscle groups. Although these strategies were intended to mitigate ACL injury-causing factors, their clinical outcomes remain controversial. Given the rapid progress of technologies in this area, however, the current state of uncertainty will gradually lead to prospective biomechanics research that can adopt a multifactorial approach toward protecting the ACL from injury.